Fiberglass Chopped Strand Mat is an unwoven fabric consisting of randomly distributed chopped strands held together with a powder or emulsion binder.

Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, Tank, boats, FRP roofing sheet, Auto roof, bathroom equipment and cooling towers etc.,

General Data:

Product Code: EMC & CMC

Glass type: E-glass or C-glass.

Bond type: Powder or Emulsion.

Density: 80g/㎡-900g/㎡.Normal types are 180g/㎡,.225g/㎡,.300g/,

450g/㎡,600g/㎡.

Bond Content: 100g/㎡ (10%-15%). 300g/㎡, .450g/㎡, .600g/㎡ (4%-6%)

Roll Width: 200mm-2600mm. Normal types are 750mm,1040mm, 1250mm. 1270mm, 1450mm.

Roll weight: 28kgs-55kgs. Normal types are 28kgs.30kgs.35kgs.

Package:

Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton.

Rolls can be loaded in a container directly or on pallets.

Quantity:

20GP Container: About 9500kgs.

40GP Container: About 20000kgs.

40HC Container: About 22500kgs.

Deposited:

Chopped Strand Mat should be stored in dry, cool, clean and rainproof area.

Recommended temperature range of storage is between 15-30

and relative humidity between 40%-70%.